Safety Shoes Impact Tester in line with ” national standard “, steel head of safety shoes placed in the bottom of machines red-edge, heavy hammer at a certain height free fall to impact, then check the degree of subsidence, the weight of heavy hammer is 23 ± 0.2kg . The sample fixed on the device, adjust the height of heavy hammer. Then make heavy hammer free-fall to impact test. After the test, remove the rubber to measure its size, the value ≥ 15mm is OK .

According the standards:
GB/T 20991,EN ISO 20344,AS/NZS 2210.1, ANSI Z41,CAN/CSA

Technical data:
Model: HY-610 Safety Shoes Impact Test Equipment
Hammer: 23KG (metal header) / 5KG (not metal header)
Impact of edge: 90°(R )3mm or other
Impact energy: (EN) 200J, (ANSI) 100±2J
Horsepower: DC1/4HP
Height of fall: Not less than 1200mm
Volume: 75×85×163cm
Weight: 190KG