Describe;

It is used to test the heating deformation of plastics, synthetic resins and other products, Put the material with the machine at a certain temp ,after 30 min, Sandwiched between parallel plates of the machine plus the required load, and then through the same temperature for 30 minutes, then the thickness difference before and after heating, divided by the thickness before heating, as a percentage, i.e., the deformation rate.

Technical data

1. specimen;3 window
2. Dial Gauge; （01～10）mm, （0.01～10）mm minimum 0.01mm
3. Load; 50g,100g,250g,500g,1000g.
4. Weight ; 180kg
5. Power; AC220V 15A 50Hz
6. Out size; L110 W83 H125cm
7. Temp range;RT～200℃