Product description: The test machine is widely used in various types hardware, metal, cables, … and other materials, testing, tensile, tear, peel, compression, bending and other materials research and development, inspection and testing. It is full functionality, wide range of uses.

HY-VS Chinese (English) LCD system software features:
1, Full touch control, large screen dreamlike blue backlight
2, Chinese (English) subtitle display and multi-level menu functions
3, With display the peak, current value, units, password settings, software calibration. Take points and many other features
4, Mini printer displays: date, single-point record, average, automatic calculation of the maximum value of Chinese font display print
5, Dynamic Display: during the testing process, load data along with the test, real-time dynamic display on the main screen.
6, Peak Hold: During the whole process of testing, the maximum value of test project always displayed on the screen window along with the test.
7, Manual get the point function: with special manual get the point function during the process of the test.
8, Automatic identification: After destruction of the sample, the system automatically recognizes and as expected test requirements, automatically switches to complete the next function.

Technical date:
1, Load cell: 0.5 high-precision force sensor
2, Capacity choice: 500KG
3, The accuracy rating: 1 level
4, Test Force test range: 0.4% ~ 100% FS
5, Load Accuracy: ± 1% or less
6, Load Resolution: 200000
7, Power Magnification: full automatic
8, Control System: Frequency converter
9, Transmission: AC frequency conversion motor
10, Motor Function: 0.37KW
11, The deceleration device: Italy Outes precision hollow aluminum reducer
12, Drive Alliance board: high-carbon steel forging, good mechanical strength properties, and no deformation.
13, The drive screw: Taiwan dual structure precision bowls screw
14, The guide bar: It is made by two Φ50 Korea Taijing Shaft, the surface is handled by high frequency and hard chrome plating, above HRC60.
15, Active bearings: Use Japan NSK high-carbon ball bearing.
16, The body structure: use the main frame and the control box split design.
17,Test speed range: (25～100) mm/min、(50～200) mm/min、(100～500) mm/min
18, Speed accuracy: Within ± 1% of indicated value
19, Test Stroke (excluding fixtures): 1000mm
20, Fixture handling: All fixtures use hard chrome plating, above HRC55
21, Dustproof device: use Taiwan anti stack dust cover to protect the ball screw against the dust, and the lifetime and precision of ball screw.
22, The surface treatment of the body: Use DuPont powder, electrostatic painting process, ensure no fade permanently cured at high temperature of 200 ℃.
23, Display system: HY-VS Chinese (English) LCD systems
24, Multiple protection devices:
①,Machine opening stroke switch protection upper and lower limit stroke
②, An emergency stop switch brake protection
③, Software overload limit protection
④,Breakpoint shutdown protection
25, Volume: (560x420x1800) mm
26, Power: AC220V 50HZ
27, Weight: about 200kg

Attachments:
①, making a pair jig according to your products.
②, Chinese instrument manual.
③, instrument warranty card.
④, GB CNAS third-party tester calibration report.