Product description: This tester is used to test luggage with a wheeled, such as suitcases, traveling bags, wheels, axle road pilot, it can test the wear-resistance of wheel and the overall structure of luggage, check its destruction or not, test results, could be used for improving the product quality. Also apply to the bottom of the bags tested for four wheels.

Technical date:
1, Cement Wheel diameter: (216 ± 2mm, length not less than 600mm, formula is sand (medium sand), Cement (42,5, P.0) = 3: 2
2, Cement roller quantity: Two clearances adjustable, two test rolls should be at the same level.
3, Steel impact block size: In the roll surface, equipped with a protruding steel bar, width is 30mm, thickness is 3mm.
4, Rod horizontal fixed angle: 45°± 2°mobile (angle adjustable).
5, Display mode: PLC touch screen display
6, Test Speed: 4km / h, adjustable.
7, With kilometers setting, speed setting, time setting, power cut memory function.
8, You can set the total travel, at the same time, you can set the break and stop time during the testing process.
9, Luggage fixtures: manually fixed, adjustable manually front and rear according to different size of bags.
10, Control: 7-inch LCD screen, PLC control
11, Motor: AC220V 50Hz
12, Volume: 2085*1180*1302mm
13, Accessibility: Midway specimen drop will automatically shut down

Attachments:
1, One Chinese instrument operating manual
2, The instrument warranty card
3, International CNAS third party laboratory instrument calibration report